Star Megastar Semi-Auto Pistol Assembly Instructions
- 1). Insert the barrel into the slide and push it forward slightly until it settles down onto the rails, then pull it backwards until it stops moving.
- 2). Compress the recoil spring slightly, then place it into the slide just over the barrel so that the spring is between the circular protrusion at the front of the slide and the catch on the barrel.
- 3). Turn the slide over and place it onto the rails on the top of the pistol frame. Pull the slide back on the rails until it stops moving.
- 4). Insert the take-down pin into the pistol receiver on the right side of the Megastar, then push it all the way into the pistol from left to right.
- 5). Pull back the slide assembly and release it to ensure that you have re-assembled the Megastar correctly.
Source...