- 1). Vacuum your carpet or upholstery before using your Bissell cleaner. If you are using the Bissell cleaner on your baser floor, sweep first.
- 2). Remove the measuring cup that is on top of the filling cavity and pour 2 gallons of hot water in the filling cavity.
- 3). Fill the measuring cup with 10 oz. of a Bissell cleaning fluid. This depends on what you are cleaning. You must use Bissell floor cleaning fluid for a bare floor and a carpet cleaning fluid for carpets. Add the contents of the measuring cup to the filling cavity and replace the cup on top of the filling cavity.
- 4). Plug your Bissell Big Green Deep Cleaner into a grounded outlet. Press both the vacuum/suction switch and the pump/spray switch to the on position.
- 5). Pull the trigger and push the floor nozzle to release the water and cleaner on your floor. Release the trigger and go back over the area to begin suctioning up the water, cleaner and dirt. Start at the farthest end of the room and work your way back to the exit. If you are cleaning a bare floor, you must first pop the bare floor attachment on the end of the floor nozzle.
- 6). Detach the wands from the trigger handle and attach an upholstery cleaning nozzle instead to switch to cleaning your sofa's and other upholstery. Pull the trigger to release the water and cleaning fluid and release to suck up water, dirt and cleaning fluid back up.
- 7). Turn the vacuum/suction and pump/spray switches to the off position and unplug from the grounded outlet.
Source...