Hitachi C10RA3

• The C10RA3 is the third-generation portable table saw by Hitachi. The table is larger than other models, giving you 24 inches to the right and 10 inches to the left. The saw showcases a 15-amp motor, 5,000 revolutions per minute (rpm), a self-aligning fence and a 36-tooth carbide-tipped blade.
  
  

Bosch 4100DG-09

• This Bosch features a gravity-rise stand for easier and faster setup. The table on this saw allows for ripping materials 25-inches wide. The saw has a 15-amp motor, 3,650 rpm, a fence with a digital reader and a guard that includes a riving knife and anti-kickback pawls.
  
  

Ridgid TS2410LS

• The Ridgid has storage within the body to keep everything close by. It features a 15-amp motor, 4,000 rpm, a micro adjustable fence for fine adjustments and a quick-change system to replace blades without a tool.
  
  

DeWalt DW745

• The body is capable of housing some of the accessories to keep everything together. This saw features adjustable feet to level it on an uneven surface, a 15-amp motor, 3,850 rpm, a 24-tooth carbide-tipped blade and a coating on the table to reduce friction.
  
  

Porter Cable PCB 220TS

• The PCB 220TS comes with a stand for greater portability around the job site. The saw features a 15-amp motor, 5,000 rpm, an extension table for greater ripping capacity and built-in storage.
  
  

Hitachi C10RB

• This Hitachi comes with a self-aligning fence for accurate cuts. It also features an ultra smooth table to reduce friction. The table is large enough to rip materials 24-1/2 inches. This saw showcases a 15-amp motor, 4,000 rpm and a 36-tooth carbide-tipped blade.
  
  

Craftsman Professional 21828

• This saw is not equipped with a stand. Instead it features wheels and a telescoping handle to transport the Craftsman. The portable table saw has a 15-amp motor, 5,000 rpm and a 36-tooth carbide-tipped tipped blade.
  
  

Ryobi BTS21

• This portable table saw is equipped with an extension table to allow for ripping lengths of 27 inches. The wheels attach to the body of the saw and the stand folds down for transportation. The Ryobi BTS21 features a 15-amp motor, 5,000 rpm, two fences and a 36-tooth carbide-tipped blade.
  
  

Jet 708315BTC

• The Jet is one of the few portable table saws that include an out feed support system. This table saw also as an adjustable wing to allow for ripping materials up to 24-1/2 inches. The features of this table saw include a 15-amp motor, 5,000 rpm and on-board storage.
  
  

Proxxon 38070 Table Saw FKS-E

• This table saw is suitable for cutting small straight and angled cuts. It does not come with a stand, instead, it sits on a workbench. The Proxxon is a small but powerful table saw that features a 1.6-amp motor, up to 6,800 rpm, a rip fence and a 24-tooth blade.