Dig the soil well: A spade is usually good enough to dig up the soil.
Chances are high for the soil to retain excess water during wet seasons, and to avoid this, the hole in the soil needs to be made deep enough.
Soil could be lumpy and would need breaking down.
The use of ash, cinders, and sand should from the bottom layer.
For improving quality you can also add peat moss, compost, grass clippings, manure further into the soil.
After this the top layer needs to be prepared for planting.
For preparing the top layer, leaf mould, peat moss, humus, and manure can be used in appropriate quantities.
It is a good habit to use sand, wood ash and lime also to improve the quality of the top layer of the soil.
This is not actually necessary, but can be done as and when required.
Manure should not touch the roots: Roots of the plant are very sensitive and hence ensure the roots are not in direct touch with the manure.
Bone meal is an excellent fertilizer which acts slowly into the top layer.
Necessary nutrients can be supplied to the plant in this way.
Plant food can be released into the soil for a longer duration.
You need to note that bone meal may not suit all plants.
There also exist some lime-hating plants that avoid absorption of calcium.
Another option is mixing up a part of horn and hoof and two parts of bone meal to prepare better organic matter for the soil, which can then be forked into the soils well.
Many people may not know whether the soil is alkaline or acidic.
Special kits called soil testing kits are available in the shops for testing the soil.
Testing soil is also known as testing the pH value.
If the pH value is less it means it's acidic, and if above it is alkaline in nature.
To facilitate the absorption of different nutrients, you can add peat moss and leaf mould into the soils.
Chances are high for the soil to retain excess water during wet seasons, and to avoid this, the hole in the soil needs to be made deep enough.
Soil could be lumpy and would need breaking down.
The use of ash, cinders, and sand should from the bottom layer.
For improving quality you can also add peat moss, compost, grass clippings, manure further into the soil.
After this the top layer needs to be prepared for planting.
For preparing the top layer, leaf mould, peat moss, humus, and manure can be used in appropriate quantities.
It is a good habit to use sand, wood ash and lime also to improve the quality of the top layer of the soil.
This is not actually necessary, but can be done as and when required.
Manure should not touch the roots: Roots of the plant are very sensitive and hence ensure the roots are not in direct touch with the manure.
Bone meal is an excellent fertilizer which acts slowly into the top layer.
Necessary nutrients can be supplied to the plant in this way.
Plant food can be released into the soil for a longer duration.
You need to note that bone meal may not suit all plants.
There also exist some lime-hating plants that avoid absorption of calcium.
Another option is mixing up a part of horn and hoof and two parts of bone meal to prepare better organic matter for the soil, which can then be forked into the soils well.
Many people may not know whether the soil is alkaline or acidic.
Special kits called soil testing kits are available in the shops for testing the soil.
Testing soil is also known as testing the pH value.
If the pH value is less it means it's acidic, and if above it is alkaline in nature.
To facilitate the absorption of different nutrients, you can add peat moss and leaf mould into the soils.
Source...