- 1). Remove the wheels from the bottom of the Tech Deck using the Tech Deck tool. Set them aside in a safe spot.
- 2). Place the deck on the label paper and trace around it.
- 3). Cover the design already on the deck with a coat of white acrylic paint or white out. Let the paint dry for about a half hour.
- 4). Draw your design in the traced area of the label paper. If you are printing an image, place the paper in your printer and position the image so that it will print in the traced area.
- 5). Cut out the traced image and peel the back off of the adhesive. Carefully position the cut out label over the Tech Deck and press it down, smoothing out any bumps or wrinkles.
- 6). Reattach the wheels to the bottom of the Tech Deck.
Source...