Do you often get confused about when is the best time to prune certain trees and shrubs?
Some guidelines to be aware of include:
1) Temperature Changes--If you live in a cold place where the temperatures can fluctuate, it is important to monitor those temperatures so that you don't prune too early. Generally it is safe to prune when the temperatures are holding steady during the day and don't dip too significantly at night.
2) If you notice that plants are beginning to bud then it's safe.
3) Spring flowering plants (forsythia etc) should be pruned after they flower or you will reduce their bloom.
Early Spring (March-April)
Plant type: Ornamental grasses
Task: Cut as close to the ground as possible.
Tip: Tying the tops before cutting makes the job fast and easy.
Plant type:Semi-woody perennials (Butterfly bush, Russian sage)
Task: Cut back to about 4" to produce strong new stems and best flower display.
Tip: May be cut back anytime during the winter or fall
Plant type:Broad-leaved evergreens (boxwood, holly, fire-thorn)
Task: Prune out stems with winter-injured foliage.
Tip: Wait until later in the spring to shear or hedge so new growth will quickly cover cut tips.
Plant type: Summer-flowering trees, shrubs, vines, hydrangea, and roses
Task: Remove dead, damaged, or crowded stems, shape or reduce size if desired.
Tip: Summer flower buds develop on new growth. Spring fertilization and adequate moisture in the summer will maximize number and size of summer blooms.
Early Summer (May-June)
Plant type: Spring-flowering shrubs (forsythia, rhododendron, lilacs)
Task: Prune for shaping or size control following the "prune after flowering" rule. These plants form buds for next year's flowers during the summer. Pruning after midsummer will cut off flower buds.
Tip:Deadheading -- removing fading flowers -- benefits plants like rhododendron and lilac by preventing seed formation and directing growth into flower buds for next spring. Thinning multi-stemmed shrubs by removing several of the oldest stems each year will maintain size and keep plant vigorously blooming on new stems. If any of these plants, like forsythia and lilac, are overgrown, cut down to 3" to 4" for a fresh start. A drastic procedure for problem plants growing too vigorously in full sun, this technique is called "rejuvenation" and is not for the timid gardener!
Plant type: Evergreen shrubs (yews, juniper, boxwood)
Task: Hedging and shaping if desired or thinning to reduce size.
Tip: Cut just as growth begins so new growth covers cut tips. Each job should include some inner thinning of the bush to ensure the outside layer of foliage doesn't become very thick, resulting in a thin shell of very dense foliage that is attractive to insects.
Midsummer/Fall (July-November)
Plant type: Flowering perennials and annuals
Task: Deadheading -- removing flowers as they fade -- extends the flowering or promotes a second flush of flowers. After the frost in your area, when the perennials have slowed down and annuals have died, cut down the flower heads and mulch the area well for next year's growth.
Tip: Do not deadhead if dried flowers or seed are attractive or desirable for propagation. Some folks like the look of their garden plants in the snow.
Winter (December-February)
Plant type: Deciduous and evergreen trees, crab apples and other pest-prone plants
Task: Remove any dead, damaged, or hazardous limbs. Prune limbs that interfere with walkways and structures. Remove crossed or rubbing limbs. Prune out suckers.
Tip:Winter is a great time to prune; insect and disease pressure is minimized and the plant architecture is visible. Also it is not as stressfull to the plant as it can be in mid-summer.
Some guidelines to be aware of include:
1) Temperature Changes--If you live in a cold place where the temperatures can fluctuate, it is important to monitor those temperatures so that you don't prune too early. Generally it is safe to prune when the temperatures are holding steady during the day and don't dip too significantly at night.
2) If you notice that plants are beginning to bud then it's safe.
3) Spring flowering plants (forsythia etc) should be pruned after they flower or you will reduce their bloom.
Early Spring (March-April)
Plant type: Ornamental grasses
Task: Cut as close to the ground as possible.
Tip: Tying the tops before cutting makes the job fast and easy.
Plant type:Semi-woody perennials (Butterfly bush, Russian sage)
Task: Cut back to about 4" to produce strong new stems and best flower display.
Tip: May be cut back anytime during the winter or fall
Plant type:Broad-leaved evergreens (boxwood, holly, fire-thorn)
Task: Prune out stems with winter-injured foliage.
Tip: Wait until later in the spring to shear or hedge so new growth will quickly cover cut tips.
Plant type: Summer-flowering trees, shrubs, vines, hydrangea, and roses
Task: Remove dead, damaged, or crowded stems, shape or reduce size if desired.
Tip: Summer flower buds develop on new growth. Spring fertilization and adequate moisture in the summer will maximize number and size of summer blooms.
Early Summer (May-June)
Plant type: Spring-flowering shrubs (forsythia, rhododendron, lilacs)
Task: Prune for shaping or size control following the "prune after flowering" rule. These plants form buds for next year's flowers during the summer. Pruning after midsummer will cut off flower buds.
Tip:Deadheading -- removing fading flowers -- benefits plants like rhododendron and lilac by preventing seed formation and directing growth into flower buds for next spring. Thinning multi-stemmed shrubs by removing several of the oldest stems each year will maintain size and keep plant vigorously blooming on new stems. If any of these plants, like forsythia and lilac, are overgrown, cut down to 3" to 4" for a fresh start. A drastic procedure for problem plants growing too vigorously in full sun, this technique is called "rejuvenation" and is not for the timid gardener!
Plant type: Evergreen shrubs (yews, juniper, boxwood)
Task: Hedging and shaping if desired or thinning to reduce size.
Tip: Cut just as growth begins so new growth covers cut tips. Each job should include some inner thinning of the bush to ensure the outside layer of foliage doesn't become very thick, resulting in a thin shell of very dense foliage that is attractive to insects.
Midsummer/Fall (July-November)
Plant type: Flowering perennials and annuals
Task: Deadheading -- removing flowers as they fade -- extends the flowering or promotes a second flush of flowers. After the frost in your area, when the perennials have slowed down and annuals have died, cut down the flower heads and mulch the area well for next year's growth.
Tip: Do not deadhead if dried flowers or seed are attractive or desirable for propagation. Some folks like the look of their garden plants in the snow.
Winter (December-February)
Plant type: Deciduous and evergreen trees, crab apples and other pest-prone plants
Task: Remove any dead, damaged, or hazardous limbs. Prune limbs that interfere with walkways and structures. Remove crossed or rubbing limbs. Prune out suckers.
Tip:Winter is a great time to prune; insect and disease pressure is minimized and the plant architecture is visible. Also it is not as stressfull to the plant as it can be in mid-summer.
Source...