At the outset of the mowing season, you ought to carry out a tune-up on your mower.
Begin by starting up the engine.
Put plenty of gas in the gas container to get your lawn mower running.
Following that, start up your engine and give it time to run until it runs out of gas, then remove the spark plug wire so that the engine can't start by accident.
To change the oil stick to this very simple method.
First, be sure you purchase the most suitable kind of oil, then wash off all the dirt around the top section of the oil tank (the place you fill your machine with oil).
An old toothbrush is useful for this job.
Unscrew and pull out the dipstick.
Next, find the lower side of your oil tank - a plug that can be found on the bottom of your machine.
You will need to remove the previous oil; unscrewing this plug can do just that.
Prop up your machine appropriately with bricks and rubble, giving you with a tilt which will give you access to the plug.
Place an oil dish or matching container underneath the stopper to collect the oil.
Unscrew the plug (you'll require a socket wrench) by twisting counter-clockwise and let all the filthy oil pour out.
Naturally, you don't want to have your Sunday best on when carrying out a lawn mower tune-up - rags and overalls are your best bet, but an old shirt will suffice.
Screw the drain plug back on with a clockwise motion.
Don't put it back on too tightly, you will have to be able to take it off easily next time you require a lawn mower tune-up.
Instead of over-tightening after you work on your mower, it's better to tighten without excess, and then routinely check during the mowing season to ensure that it hasn't loosened through shakes and vibrations.
If your machine possesses an oil filter, replace it as a part of the lawn mower tune-up and clean the gasket with which it has contact.
Remove the blocks so the machine is even yet again then fill the gas tank with new gas to the appropriate level, reapplying the cap and dipstick.
Finally, fill up the mower with fuel and reconnect the spark plug wire.
At this point in the lawn mower tune-up, you should start up the machine.
Encourage the engine to idle and be sure that there aren't any oil leaks.
You're finished! Now you have correctly tuned your mower it is going to work with full-force to help you out for the rest of the season.
Begin by starting up the engine.
Put plenty of gas in the gas container to get your lawn mower running.
Following that, start up your engine and give it time to run until it runs out of gas, then remove the spark plug wire so that the engine can't start by accident.
To change the oil stick to this very simple method.
First, be sure you purchase the most suitable kind of oil, then wash off all the dirt around the top section of the oil tank (the place you fill your machine with oil).
An old toothbrush is useful for this job.
Unscrew and pull out the dipstick.
Next, find the lower side of your oil tank - a plug that can be found on the bottom of your machine.
You will need to remove the previous oil; unscrewing this plug can do just that.
Prop up your machine appropriately with bricks and rubble, giving you with a tilt which will give you access to the plug.
Place an oil dish or matching container underneath the stopper to collect the oil.
Unscrew the plug (you'll require a socket wrench) by twisting counter-clockwise and let all the filthy oil pour out.
Naturally, you don't want to have your Sunday best on when carrying out a lawn mower tune-up - rags and overalls are your best bet, but an old shirt will suffice.
Screw the drain plug back on with a clockwise motion.
Don't put it back on too tightly, you will have to be able to take it off easily next time you require a lawn mower tune-up.
Instead of over-tightening after you work on your mower, it's better to tighten without excess, and then routinely check during the mowing season to ensure that it hasn't loosened through shakes and vibrations.
If your machine possesses an oil filter, replace it as a part of the lawn mower tune-up and clean the gasket with which it has contact.
Remove the blocks so the machine is even yet again then fill the gas tank with new gas to the appropriate level, reapplying the cap and dipstick.
Finally, fill up the mower with fuel and reconnect the spark plug wire.
At this point in the lawn mower tune-up, you should start up the machine.
Encourage the engine to idle and be sure that there aren't any oil leaks.
You're finished! Now you have correctly tuned your mower it is going to work with full-force to help you out for the rest of the season.
Source...