There are some many websites that claim to provide articles that are all about kitchen cabinet refacing but end up mixing the ideas and suggestions made with replacement.
Let me quickly walk you through the following key points.
What is Kitchen cabinet refacing? This is a process whereby old cabinets are redone with a new coating like laminate, thermo-foil or veneer.
In most cases you may have to replace only the doors and drawer fronts.
Ideally the process is easier and faster than a complete kitchen remodel.
In fact is can be a far less as 60% when comparing with the cost of buying new cabinets.
So in essence, it is the most efficient, affordable and hassle-free way to boost your kitchen's look and feel.
Types of coating used Wood veneer This is a is a thin slice of wood that is cut from a log with a slicing, peeling, or sawing machine.
This is used to give the cabinets a fine wood grain.
Take note that this material comes in a variety of species.
This means will need to consult with an expert to help you find the best for you kitchen.
Laminate Laminate is primarily made of plastic film or thin sheet formed from resins such as polyethylene and polypropylene.
Although cheaper it is, however, strong wearing resistant.
Furthermore, it works well in heat oil resistance and can seal heat perfectly.
Thermo-Foil This is considered to be a revolutionary new wood-like material for Cabinetry.
Sometimes referred to as Vinyl or RTF it has a thick vinyl film is bonded permanently to a warp-resistant engineered wood core.
How to reface Refacing involved stripping off the current paint or varnish, sanding till to bare wood or until you reach the color you want.
Truth is this may be a long process, which could last for days and may be dangerous especially if the cabinet paint has lead.
After you are done stripping and sanding you would then have to refinish.
There are several options for doing this.
Let me quickly walk you through the following key points.
What is Kitchen cabinet refacing? This is a process whereby old cabinets are redone with a new coating like laminate, thermo-foil or veneer.
In most cases you may have to replace only the doors and drawer fronts.
Ideally the process is easier and faster than a complete kitchen remodel.
In fact is can be a far less as 60% when comparing with the cost of buying new cabinets.
So in essence, it is the most efficient, affordable and hassle-free way to boost your kitchen's look and feel.
Types of coating used Wood veneer This is a is a thin slice of wood that is cut from a log with a slicing, peeling, or sawing machine.
This is used to give the cabinets a fine wood grain.
Take note that this material comes in a variety of species.
This means will need to consult with an expert to help you find the best for you kitchen.
Laminate Laminate is primarily made of plastic film or thin sheet formed from resins such as polyethylene and polypropylene.
Although cheaper it is, however, strong wearing resistant.
Furthermore, it works well in heat oil resistance and can seal heat perfectly.
Thermo-Foil This is considered to be a revolutionary new wood-like material for Cabinetry.
Sometimes referred to as Vinyl or RTF it has a thick vinyl film is bonded permanently to a warp-resistant engineered wood core.
How to reface Refacing involved stripping off the current paint or varnish, sanding till to bare wood or until you reach the color you want.
Truth is this may be a long process, which could last for days and may be dangerous especially if the cabinet paint has lead.
After you are done stripping and sanding you would then have to refinish.
There are several options for doing this.
Source...