Basement sump pumps are very effective in removing water below the level of the floor.
This in turn gives any water above that level a place to go and gets it off the floor.
If your home is not built on top of a hill, or has direct down hill flow to a storm sewer, it probably already has one.
You may not notice it, as they usually only make noise when they are running, after a heavy rain.
If you are near it, you can hear it, otherwise it is just a covered hole in the basement floor, about the size of a large trash container.
If you have basement floor water and do not have a sump pump, and you can't divert the water away from the walls on the outside to insure they are dry.
This is one of the first things you should consider.
Often simply installing a sump pump in the lowest level of the basement will release any backed up water from basement seepage or basement leaks by discharging it to an exterior discharge line, thus solving the problem with no additional work being necessary.
If the water is backed up in the walls, you may also have to install interior footer drain tiles from those walls to it.
Do not install these drain tiles without first consulting someone with experience in this field, as one must be careful to not remove the cement from the floor along the entire wall without leaving unbroken support segments at intervals along the wall.
Removing these buttressing cement segments along the entire wall may let the tons of external pressure on the bottom row of blocks push them into the basement.
This removes the entire support from any blocks above the bottom row, which will cause the wall and anything above it to collapse into the basement.
It goes without saying, this could be very dangerous.
You can go to http://www.
basementwaterproofinginfo.
com for a more detailed explanation basement sump pumps and how they are used.
This in turn gives any water above that level a place to go and gets it off the floor.
If your home is not built on top of a hill, or has direct down hill flow to a storm sewer, it probably already has one.
You may not notice it, as they usually only make noise when they are running, after a heavy rain.
If you are near it, you can hear it, otherwise it is just a covered hole in the basement floor, about the size of a large trash container.
If you have basement floor water and do not have a sump pump, and you can't divert the water away from the walls on the outside to insure they are dry.
This is one of the first things you should consider.
Often simply installing a sump pump in the lowest level of the basement will release any backed up water from basement seepage or basement leaks by discharging it to an exterior discharge line, thus solving the problem with no additional work being necessary.
If the water is backed up in the walls, you may also have to install interior footer drain tiles from those walls to it.
Do not install these drain tiles without first consulting someone with experience in this field, as one must be careful to not remove the cement from the floor along the entire wall without leaving unbroken support segments at intervals along the wall.
Removing these buttressing cement segments along the entire wall may let the tons of external pressure on the bottom row of blocks push them into the basement.
This removes the entire support from any blocks above the bottom row, which will cause the wall and anything above it to collapse into the basement.
It goes without saying, this could be very dangerous.
You can go to http://www.
basementwaterproofinginfo.
com for a more detailed explanation basement sump pumps and how they are used.
Source...