Are you disappointed with the results of your new digital camera? Did you pay extra to get the latest giga pixel camera with all the bells and whistles? And yet, your digital prints do not look like you expected? Do your prints lack detail? Is the subject all white or over exposed? Do you feel like getting your old 35mm film camera back out? Here's a few tips and tricks that might help improve the quality of your digital prints.
Let's start by trying to get those digital photos as sharp as possible.
First, make sure that your camera is set to the highest resolution and quality setting.
Once you've done this, forget that your camera has the ability to choose a lower quality setting.
Your images may look nice and the preview screen on the back of the camera, but you will find it is much different when you try to make a digital print.
This will also ensure that when you take that once-in-a-lifetime photo you have plenty of resolution to blow it up.
Another setting that affects the amount of detail image is ISO.
A lower ISO setting will have less noise and look much better.
Some cameras automatically adjust the ISO for you depending on the lighting situation.
Next make sure that you are not too close to your subject.
While many digital cameras can focus and extremely close distances, they cannot handle flash as close.
For most point-and-shoot cameras the minimum distance for the flash is 3 to 4 feet.
You'll want to check your camera manual to be sure what the minimum distance is.
Any closer than this, and the flash will provide too much light on the subject.
This will over exposed subject, causing it to be white and ghostly.
It is very difficult or impossible to fix an over exposed digital image.
Also remember that flash also has a maximum range.
For many digital point-and-shoot cameras this is around 12 feet.
Much farther and the flash will not provide enough light for a good exposure.
The ISO setting on the camera also affects the flash range.
Finally let's look at the way you hold your camera and compose the picture.
Believe it or not, there is a right way and a wrong way to hold your camera.
You need to make sure that you can hold the camera as steady as possible.
This usually means bracing your arm against your chest and not holding the camera at arms length.
There is most likely a picture or drawing in your camera manual on the correct way to hold the camera.
Also, as you compose your picture, make sure there are no objects between you and your subject.
If you are using flash, you camera may try to adjust the exposure for the object in the foreground and not your subject.
Always try to simplify your composition.
Try to make it clear to anyone viewing the image what the subject is.
In a word, simplify.
One last suggestion.
Get a good quality digital print made from your favorite images.
I recommend either local camera store that does in-house printing, or one of the online digital printers.
I think you'll be much more satisfied with some of the better-known online digital print services instead of the local drugstore.
Also, getting a good quality digital print made online is usually cheaper than trying to print digital photos yourself, and the results are usually better.
Let's start by trying to get those digital photos as sharp as possible.
First, make sure that your camera is set to the highest resolution and quality setting.
Once you've done this, forget that your camera has the ability to choose a lower quality setting.
Your images may look nice and the preview screen on the back of the camera, but you will find it is much different when you try to make a digital print.
This will also ensure that when you take that once-in-a-lifetime photo you have plenty of resolution to blow it up.
Another setting that affects the amount of detail image is ISO.
A lower ISO setting will have less noise and look much better.
Some cameras automatically adjust the ISO for you depending on the lighting situation.
Next make sure that you are not too close to your subject.
While many digital cameras can focus and extremely close distances, they cannot handle flash as close.
For most point-and-shoot cameras the minimum distance for the flash is 3 to 4 feet.
You'll want to check your camera manual to be sure what the minimum distance is.
Any closer than this, and the flash will provide too much light on the subject.
This will over exposed subject, causing it to be white and ghostly.
It is very difficult or impossible to fix an over exposed digital image.
Also remember that flash also has a maximum range.
For many digital point-and-shoot cameras this is around 12 feet.
Much farther and the flash will not provide enough light for a good exposure.
The ISO setting on the camera also affects the flash range.
Finally let's look at the way you hold your camera and compose the picture.
Believe it or not, there is a right way and a wrong way to hold your camera.
You need to make sure that you can hold the camera as steady as possible.
This usually means bracing your arm against your chest and not holding the camera at arms length.
There is most likely a picture or drawing in your camera manual on the correct way to hold the camera.
Also, as you compose your picture, make sure there are no objects between you and your subject.
If you are using flash, you camera may try to adjust the exposure for the object in the foreground and not your subject.
Always try to simplify your composition.
Try to make it clear to anyone viewing the image what the subject is.
In a word, simplify.
One last suggestion.
Get a good quality digital print made from your favorite images.
I recommend either local camera store that does in-house printing, or one of the online digital printers.
I think you'll be much more satisfied with some of the better-known online digital print services instead of the local drugstore.
Also, getting a good quality digital print made online is usually cheaper than trying to print digital photos yourself, and the results are usually better.
Source...