- 1). Follow the front grill out to the front fenders and locate the parking light lenses at the end of the grill.
- 2). Detach the two screws securing the parking lamp lens to the fender, using a Phillips scredriver. There is one upper and one lower screw.
- 3). Pull the lens away from the fender.
- 4). Turn the lens upside down and locate the bulb socket on the rear. The bulb socket is located by tracing the electrical wire towards the lens.
- 5). Grasp the socket and turn it counterclockwise to release it. Pull the socket out of the lens.
- 6). Grasp the bulb and pull it from the socket.
- 7). Push the new bulb into the socket.
- 8). Place the socket into the lens and turn it clockwise to lock it into place.
- 9). Place the lens back onto the fender and tighten the two screws with the screwdriver.
Source...