How to Configure Norton Internet Security to Work With TiVo
- 1). Click on the icon of the Norton Internet Security software to bring its window up on the screen. Select the "Settings" icon to go to a new window. Select the "Ports" tab in the new window.
- 2). Check the following in the list below the "Ports" tab so as to open the ports that are necessary for the TiVo Server software running on the PC to be able to broadcast the beacon signal to the TiVo:
TCP port 37
TCP port 80
TCP port 44
TCP port 2190
TCP port 4430
TCP port 5222
TCP port 5223
TCP port 5254
TCP port 5354
TCP port 7287-7297
TCP port 8000
TCP ports 8080-8089
TCP port 8101
TCP port 8102
TCP port 8181
TCP port 8200
UDP port 37
UDP port 123
UDP port 2190
UDP port 5353 - 3). Select the "IP Address" tab. Delete any of the following IP addresses if they are listed in the "Restricted" or "Quarantine" column:
208.73.180.0 through 208.73.183.255
204.176.49.0 through 204.176.49.127
206.112.115.0 through 206.112.115.255 - 4). Click on the "Apply" button. Click the small "X" in the upper corner to minimize the window.
Source...