Power and Lathe

• The Shopsmith Mark V has a conventional AC motor that is wired for 120 Volts. The amperage for the Mark V is 13.5 amps, while the horsepower is 1 1/8 hp. The motor for this machine uses pulleys and belts as its speed change mechanism, and it is not reversible. The speed range of the Mark V's motor is 700 to 5,200 rpm. The Mark V's tool rest and arm swings a full 360 degrees, with a maximum distance between centers of 34 inches.
  
  

Table Saw

• The saw blade diameter for the Mark V is 10 inches. The main table size is 17 1/2 inches by 22 inches. The milter range for this machine is 60 degrees to the left and 60 degrees to the right, which allows users to hold the "stock at precise angles during sawing," according to Shopsmith's website. The maximum depth of cut at zero degrees is 3 1/4 inches, so it will saw completely through a piece of 4-by-4 wood. The maximum ripping capacity is 98 inches.
  
  

Disc Sander and Horizontal Boring Machine

• Because the disc diameter of the disc sander is 12 inches long, the Mark V provides 113 square inches of sanding surface. The milter range of the disc sander is 60 degrees to the left and 60 degrees to the right, and the disc feed is 4 1/4 inches. The horizontal boring machine provides an unlimited stock length, and the quill feed is 4 1/4 inches. The quill feed "feeds bit into your stock," according to Shopsmith.
  
  

Vertical Drill Press and Over-Table Router

• The vertical drill press of the Shopsmith Mark V has the capacity to drill to the center of a 16 1/2 inch workpiece. The main table size is 17 1/2 by 22 inches. The maximum chuck-to-table distance is 25 inches, while the maximum chuck-to-floor distance is 58 inches. The Mark V's over-table router has a throat clearance of 15 1/4 inches, while the spindle stroke is 4 1/4 inches and the bit chuck is 1/2 inch in diameter. A 1/4-inch model of the bit chuck is also available. The spindle speeds for the over-table router range from 250 to 10,000 rpm.