You can use metal or plastic, but if you are going to use metal for a ferret cage, make sure it is the stainless no rusting type.
When using plastic, make sure also that this is not the chipping off type as ferrets may see this as a toy and bite and chew it off and chew the bits, leading the ferret to choke.
Here are the things you need to consider in building a ferret cage: 1.
Always use metal for the bottom tray of the cage.
You will need balance when the ferret tries to run, jump and climb inside.
To protect the ferret his feet you need a soft material for the flooring, vinyl is usually recommended, since ferret feet are too sensitive for metal screens and gaps.
2.
Remember, or if you must, write down the basics.
Dimension have to be 2 feet wide by 2 feet deep by 2 feet tall.
Ensure that you have all room for these: play area, sleep area, eating/drinking area, and litter box.
It needs a lot of air for it to breathe properly and it also needs all the space it can get for it to run and roam inside the cage.
For your ferret it has to be very comfortable.
You do not have to be very extravagant, but the basic comfort for your ferret is ok.
There are many owners who would like a level cage since these types save a lot of space.
3.
If you see sharp edges, tie them with duct tape.
When you build a cage, make sure that there are no protruding edges for your ferret to cut itself with.
Secure all corners and edges with duct tape and make fully sure that it wood not break, tear, or run once your ferret poops, wets, litters, or spills food and water over the duct tapes.
4.
Always remember the door.
This is always forgotten last minute because all excitement could get up in setting up your first ferret cage.
Leave a spacious room enough for the ferret to fit inside without having to squeeze himself that much.
Remember that ferrets have ease squeezing themselves in, but have a lot of trouble going OUT.
Always prepare for the time when your ferret grows bigger and the door must be spacious still to accommodate a grown ferret.
5.
Always use a water bottle and not a cup, bowl, or anything that will spill over.
Ferrets need a lot of food and water and a water bottle securely mounted on the cage is always the better option.
The food tray has to be easily accessible for the ferret to eat from, but very impossible to spill or turn over.
Avoiding the chance for them to spill clean food and water is always wiser in setting up his cage.
6.
Place old newspapers, recycled paper, wood pellets, or absorbents for the base of the litter box or tray.
These are very efficient in lessening really bad odor.
7.
Make the cage big enough for his toys, tubes, ladders and other toys fit inside.
You need to keep them busy and happy.
Ferrets need toys they can not bite off or chew.
Old baby toys can do and you can put them inside the cage.
Once you are done, give it as a wonderful surprise to your ferret friend and he is surely going to love it!
When using plastic, make sure also that this is not the chipping off type as ferrets may see this as a toy and bite and chew it off and chew the bits, leading the ferret to choke.
Here are the things you need to consider in building a ferret cage: 1.
Always use metal for the bottom tray of the cage.
You will need balance when the ferret tries to run, jump and climb inside.
To protect the ferret his feet you need a soft material for the flooring, vinyl is usually recommended, since ferret feet are too sensitive for metal screens and gaps.
2.
Remember, or if you must, write down the basics.
Dimension have to be 2 feet wide by 2 feet deep by 2 feet tall.
Ensure that you have all room for these: play area, sleep area, eating/drinking area, and litter box.
It needs a lot of air for it to breathe properly and it also needs all the space it can get for it to run and roam inside the cage.
For your ferret it has to be very comfortable.
You do not have to be very extravagant, but the basic comfort for your ferret is ok.
There are many owners who would like a level cage since these types save a lot of space.
3.
If you see sharp edges, tie them with duct tape.
When you build a cage, make sure that there are no protruding edges for your ferret to cut itself with.
Secure all corners and edges with duct tape and make fully sure that it wood not break, tear, or run once your ferret poops, wets, litters, or spills food and water over the duct tapes.
4.
Always remember the door.
This is always forgotten last minute because all excitement could get up in setting up your first ferret cage.
Leave a spacious room enough for the ferret to fit inside without having to squeeze himself that much.
Remember that ferrets have ease squeezing themselves in, but have a lot of trouble going OUT.
Always prepare for the time when your ferret grows bigger and the door must be spacious still to accommodate a grown ferret.
5.
Always use a water bottle and not a cup, bowl, or anything that will spill over.
Ferrets need a lot of food and water and a water bottle securely mounted on the cage is always the better option.
The food tray has to be easily accessible for the ferret to eat from, but very impossible to spill or turn over.
Avoiding the chance for them to spill clean food and water is always wiser in setting up his cage.
6.
Place old newspapers, recycled paper, wood pellets, or absorbents for the base of the litter box or tray.
These are very efficient in lessening really bad odor.
7.
Make the cage big enough for his toys, tubes, ladders and other toys fit inside.
You need to keep them busy and happy.
Ferrets need toys they can not bite off or chew.
Old baby toys can do and you can put them inside the cage.
Once you are done, give it as a wonderful surprise to your ferret friend and he is surely going to love it!
Source...