Infant seat covers for rear facing seats are not difficult to find.
If you are trying to replace your current cover because it is damaged, you will want to order a new one from the manufacturer.
If you look in your instruction manual, you should be able to find a phone number for the manufacturer.
Once you locate this number, you can call them and ask how to order replacement parts.
You also have the option of going manufacturer's website to find a replacement cover.
Most major manufacturers of baby products have a page on their site dedicated to replacement parts.
This is a quick and easy way to order an infant cover for your rear facing infant seat.
If you cover is not damaged and you just want a different print for your car seat you should try looking on e-bay.
Many e-bay sellers sell custom covers for rear facing infant seats.
These covers are very cute and come in a large verity of colors and patterns.
You will want to check to make sure that the cover you want to purchase will fit your particular brand of car seat.
Most people who sell this item on e-bay have clearly stated in the auction which brand their cover will fit.
You can also find custom infant car seat covers in specialty baby stores.
Check out the local boutiques in your area for these cute seat covers.
If you don't have any local baby boutiques, try doing a Google search for baby boutiques on the web.
You will be sure to find at least a few that carry seat cover for rear facing seats.
If you can't find what you are looking for, you might want to consider creating your owncover.
If you are good at sewing, it should be fairly easy to do.
The following steps will give you a good idea of how to create your own.
1.
) Pick out the fabric that you want for your cover.
Remember it will be easiest to use only one color of fabric; however if you are ambitious you can use two if you would like.
2.
) Remove the cover that is currently on your car seat and trace it on a piece of newspaper to make your pattern.
You will also want to trace the place in the cover that is open for the straps.
3.
) Depending on how your seat cover is made you will want to extend your pattern 1-2 inches, so that the cover will be easily attached to the car seat by elastic.
4.
) Now cut your pattern into your fabric and hem all the edges.
5.
) Sew elastic all the way around the exterior of the cover.
This was just to give you a general idea of how to create a cover.
You will need to adjust this guide to work with your particular car seat.
The elastic cover should fit easily over your old seat cover; this way will get the padded protection of your old cover, with the look of your new cover.
If you are trying to replace your current cover because it is damaged, you will want to order a new one from the manufacturer.
If you look in your instruction manual, you should be able to find a phone number for the manufacturer.
Once you locate this number, you can call them and ask how to order replacement parts.
You also have the option of going manufacturer's website to find a replacement cover.
Most major manufacturers of baby products have a page on their site dedicated to replacement parts.
This is a quick and easy way to order an infant cover for your rear facing infant seat.
If you cover is not damaged and you just want a different print for your car seat you should try looking on e-bay.
Many e-bay sellers sell custom covers for rear facing infant seats.
These covers are very cute and come in a large verity of colors and patterns.
You will want to check to make sure that the cover you want to purchase will fit your particular brand of car seat.
Most people who sell this item on e-bay have clearly stated in the auction which brand their cover will fit.
You can also find custom infant car seat covers in specialty baby stores.
Check out the local boutiques in your area for these cute seat covers.
If you don't have any local baby boutiques, try doing a Google search for baby boutiques on the web.
You will be sure to find at least a few that carry seat cover for rear facing seats.
If you can't find what you are looking for, you might want to consider creating your owncover.
If you are good at sewing, it should be fairly easy to do.
The following steps will give you a good idea of how to create your own.
1.
) Pick out the fabric that you want for your cover.
Remember it will be easiest to use only one color of fabric; however if you are ambitious you can use two if you would like.
2.
) Remove the cover that is currently on your car seat and trace it on a piece of newspaper to make your pattern.
You will also want to trace the place in the cover that is open for the straps.
3.
) Depending on how your seat cover is made you will want to extend your pattern 1-2 inches, so that the cover will be easily attached to the car seat by elastic.
4.
) Now cut your pattern into your fabric and hem all the edges.
5.
) Sew elastic all the way around the exterior of the cover.
This was just to give you a general idea of how to create a cover.
You will need to adjust this guide to work with your particular car seat.
The elastic cover should fit easily over your old seat cover; this way will get the padded protection of your old cover, with the look of your new cover.
Source...