Wire and cable comes in all shapes and sizes including cut to length and possibly stripped insulation.
Such things should be conducted by an ISO9001 certified company because they are forced to perform checks that, if done incorrectly, can negatively impact the company as a whole.
Being an ISO9001 company means that the company has been checked and certified as having a system in place to stop errors from happening or correct them immediately.
Not doing so will give the company a "bad grade" with the certification audit team that checks on the company annually.
They come into the company, check the process in place and push for continuous improvement throughout the organization to be sure correct product is always being sent to customers.
Cutting 18 AWG bare copper is quite simple to perform but let me give you an idea as to how an ISO9001 certified company might perform the action.
First, the sales person will double check and sign off on the revision of the specification sheet given by the customer to be sure everything is accurate.
Second, the production manager makes a first article sample for the rest of the production team to view during the cutting process.
Third, during the process there is a certain amount of times the assembler must verify the length while cutting to make sure the machine cutting it didn't have any hiccups along the way.
Finally, the production manager checks and signs off that a percentage of the pieces were done correctly before boxing them and sending them to the customer.
As you can see having your bare copper cut by a company that's already ISO9001 certified will nearly guarantee that it will be done correctly.
If not, however, the company also has it in their policy to completely refund and/or fix the mistake that was made.
Whenever mistakes are made they're documented for commonality to other specifications that may relate.
Continuous improvement will be conducted at that point.
Solid copper 18 AWG can be cut to any length you need by most suppliers.
It can also come on 100, 250, 500 and 1000 foot plastic spools for you to cut as you need.
Ordering at the right price is always a good idea, but getting correct product each and every time can hold quite the worth itself.
Also, knowing that the company you bought it from is ready to fix the mistake immediately is something that might be hard to come by.
Such things should be conducted by an ISO9001 certified company because they are forced to perform checks that, if done incorrectly, can negatively impact the company as a whole.
Being an ISO9001 company means that the company has been checked and certified as having a system in place to stop errors from happening or correct them immediately.
Not doing so will give the company a "bad grade" with the certification audit team that checks on the company annually.
They come into the company, check the process in place and push for continuous improvement throughout the organization to be sure correct product is always being sent to customers.
Cutting 18 AWG bare copper is quite simple to perform but let me give you an idea as to how an ISO9001 certified company might perform the action.
First, the sales person will double check and sign off on the revision of the specification sheet given by the customer to be sure everything is accurate.
Second, the production manager makes a first article sample for the rest of the production team to view during the cutting process.
Third, during the process there is a certain amount of times the assembler must verify the length while cutting to make sure the machine cutting it didn't have any hiccups along the way.
Finally, the production manager checks and signs off that a percentage of the pieces were done correctly before boxing them and sending them to the customer.
As you can see having your bare copper cut by a company that's already ISO9001 certified will nearly guarantee that it will be done correctly.
If not, however, the company also has it in their policy to completely refund and/or fix the mistake that was made.
Whenever mistakes are made they're documented for commonality to other specifications that may relate.
Continuous improvement will be conducted at that point.
Solid copper 18 AWG can be cut to any length you need by most suppliers.
It can also come on 100, 250, 500 and 1000 foot plastic spools for you to cut as you need.
Ordering at the right price is always a good idea, but getting correct product each and every time can hold quite the worth itself.
Also, knowing that the company you bought it from is ready to fix the mistake immediately is something that might be hard to come by.
Source...