0x00000050 Blue Screen Error Fix - How To Stop This Error From Continually Showing On Your PC
0×00000050 is a blue screen error which forms on Windows PCs that don't have the correct graphics adapter settings.
This problem is typically caused when you try and upgrade your Windows installation from the "initial" release of the system to the likes of SP1 or SP2, and is specifically caused by your PC not correctly updating the files which it needs to run.
If you have this error on your system, you can fix it by changing the display adapter settings and resolving any problems with the registry of your system.
This error will most likely show in this format:
These drivers are what is used by Windows to help load up all the settings & options that your computer will use to run, allowing your PC to actually put an image on your screen.
It's likely that a setting inside your computer which handles this data became corrupted - leading your PC to slow down and show this problem.
To fix this error, you should first resolve any graphical interface issued and then fix any possible problems with the settings of your PC.
The first step to fix this error is to first boot up into Safe Mode.
This is a mode which Microsoft introduced into Windows to help load up your computer without any of the software / drivers which could be causing problems for your PC.
Because the 0×00000050 error is a driver related issue, booting up into Safe Mode should allow you to perform any maintenance on your computer which you may not be able to in "normal" mode.
Here's how to boot into safe mode:
inf files.
These files are used by Windows to help control a large number of important settings & options for your system, and are used by all sorts of software & hardware to help keep your system running.
It's likely that your PC has some sort of mis-configuration with the.
inf files it needs to run, and is therefore recommended that you try and correct the issue.
It's then recommended that you download a "registry cleaner" application from the Internet and then let it scan your PC for any potential errors.
Registry cleaners are popular software programs which are able to look through all the settings of your system and repair any of the problems which are inside.
Because the 0×00000050 error is likely going to be caused by the way in which your system will be unable to correctly read its registry settings, you should resolve the problem you're seeing by using a registry repair program to scan through your PC.
This problem is typically caused when you try and upgrade your Windows installation from the "initial" release of the system to the likes of SP1 or SP2, and is specifically caused by your PC not correctly updating the files which it needs to run.
If you have this error on your system, you can fix it by changing the display adapter settings and resolving any problems with the registry of your system.
This error will most likely show in this format:
- "STOP: 0×00000050 (0×8872A990, 0×00000001, 0×804F35D7, 0×00000000)
- PAGE_FAULT_IN_NON-PAGED_AREA"
These drivers are what is used by Windows to help load up all the settings & options that your computer will use to run, allowing your PC to actually put an image on your screen.
It's likely that a setting inside your computer which handles this data became corrupted - leading your PC to slow down and show this problem.
To fix this error, you should first resolve any graphical interface issued and then fix any possible problems with the settings of your PC.
The first step to fix this error is to first boot up into Safe Mode.
This is a mode which Microsoft introduced into Windows to help load up your computer without any of the software / drivers which could be causing problems for your PC.
Because the 0×00000050 error is a driver related issue, booting up into Safe Mode should allow you to perform any maintenance on your computer which you may not be able to in "normal" mode.
Here's how to boot into safe mode:
- Restart your damaged PC
- Before Windows even starts to load, press F8 on your keyboard repeatedly
- When the "Boot Options" menu loads, use the arrows to select "Safe Mode With Networking"
inf files.
These files are used by Windows to help control a large number of important settings & options for your system, and are used by all sorts of software & hardware to help keep your system running.
It's likely that your PC has some sort of mis-configuration with the.
inf files it needs to run, and is therefore recommended that you try and correct the issue.
It's then recommended that you download a "registry cleaner" application from the Internet and then let it scan your PC for any potential errors.
Registry cleaners are popular software programs which are able to look through all the settings of your system and repair any of the problems which are inside.
Because the 0×00000050 error is likely going to be caused by the way in which your system will be unable to correctly read its registry settings, you should resolve the problem you're seeing by using a registry repair program to scan through your PC.
Source...