- 1). Hold the anchors to the brick in the proper position. Mark where the screws will go to hold the anchor to the brick. Remove the anchor.
- 2). Drill a hole into the brick with the drill bit, holding it steady. Use goggles to protect your eyes from the flying dust.
- 3). Clean the hole out with a blast from a compressed air can.
- 4). Spray the screw with the thread locking adhesive, which will prevent the screw from backing out because of vibrations.
- 5). Hold the anchor to the wall and screw the drill into the hole, attaching the anchor until the screw is removed.
Source...