- 1). Attach two tanning lights vertically on each piece of plywood using the screws that come with the lighting fixtures.
- 2). Build the tanning booth by attaching three pieces of wood to form a U using nails to bind the joints of the booth together. Five nails on each joint is optimal.
- 3). Attach the fourth piece of wood as a door using the door hinge and screws. The door should open and close easily.
- 4). Attach one hook lock to the inside of the tanning booth and one to the outside of the tanning booth using screws. This will allow the door to stay closed when a tanning session is taking place or shut from the outside when the booth is not in use.
- 5). Plug the power cords into the surge protector and plug the surge protector into the wall when you want to use the tanning booth.
Source...