Nowadays, people are looking to find new finds comprised mostly of old things. Here are some tips that can help you out here. You will be able to find paints that have a crackle finish. Unbeknownst to many, this is one of the most popular painting techniques being used today.
I myself wanted to see if this works.
If you are into that vintage style, consider trying this technique out. It is important to buy some drop cloths, latex satin wall paint, paint brush for latex paint, roller and roller cover, crackle medium, and masking tape in this case.
Prepare your walls by applying a base coat of latex paint and then allowing it to dry. If you want to select a color that will show through the crackle effect in the topcoat, use a satin finish for the base coat. Some people need crackle finish in the gallons and some need them in pints.
It is possible to find a project that calls for a single application of crackle finish. When it comes to walls or furniture, do apply the crackle finish in sections. Before painting, seal some areas off with the masking tape. Using a brush or roller, depending on the size of your project, apply the crackle.
Only roll on the paint after you have been able to cut in the edges of the walls. It takes one hour for the crackle paint to completely dry in this case. One word of caution is that you need to apply the top coat of paint as soon as the crackle finish is dried. Do not leave the crackle for a moment sooner after it dries. There are two methods when it comes to the application of the latex satin paint top coat.
Depending on the kind of finish that you are looking for, a natural sea sponge will give you fine cracks while larger ones can be achieved when you use a paint brush. When it comes to this kind of painting method, walls are best done with a brush. You need to overcome a lot of obstacles when it comes to crackle finish.
Using your handy paint brush, start at one end of the room. The brush can damage the crackle finish if you mistakenly apply more than a coat of paint after the crackle has been applied.
When it was our time to work on our wall, we applied the paint in long even strokes and worked it from top to bottom. Then we moved over to a fresh section blending the brush strokes into the previous painted section. You can say that we were no experts in this endeavor. Never forget to skim through the manufacturer's recommendations in this case.
I myself wanted to see if this works.
If you are into that vintage style, consider trying this technique out. It is important to buy some drop cloths, latex satin wall paint, paint brush for latex paint, roller and roller cover, crackle medium, and masking tape in this case.
Prepare your walls by applying a base coat of latex paint and then allowing it to dry. If you want to select a color that will show through the crackle effect in the topcoat, use a satin finish for the base coat. Some people need crackle finish in the gallons and some need them in pints.
It is possible to find a project that calls for a single application of crackle finish. When it comes to walls or furniture, do apply the crackle finish in sections. Before painting, seal some areas off with the masking tape. Using a brush or roller, depending on the size of your project, apply the crackle.
Only roll on the paint after you have been able to cut in the edges of the walls. It takes one hour for the crackle paint to completely dry in this case. One word of caution is that you need to apply the top coat of paint as soon as the crackle finish is dried. Do not leave the crackle for a moment sooner after it dries. There are two methods when it comes to the application of the latex satin paint top coat.
Depending on the kind of finish that you are looking for, a natural sea sponge will give you fine cracks while larger ones can be achieved when you use a paint brush. When it comes to this kind of painting method, walls are best done with a brush. You need to overcome a lot of obstacles when it comes to crackle finish.
Using your handy paint brush, start at one end of the room. The brush can damage the crackle finish if you mistakenly apply more than a coat of paint after the crackle has been applied.
When it was our time to work on our wall, we applied the paint in long even strokes and worked it from top to bottom. Then we moved over to a fresh section blending the brush strokes into the previous painted section. You can say that we were no experts in this endeavor. Never forget to skim through the manufacturer's recommendations in this case.
Source...