- 1). Place your Oakley Juliet sunglasses on a flat surface in a well-lit room. Locate the screws just below the orbitals on the sunglasses. The screws will be on the inside of the sunglasses underneath the lenses on the frame.
- 2). Remove the screws with the T6 screwdriver. Take care not to scratch the lenses or frame while removing the screws.
- 3). Remove the rubber washers once the screws are removed. Often the washers will come out with the screws, but occasionally they stick. Carefully pry them out with the T6 screwdriver if necessary. Place both the screws and washers in a secure place.
- 4). Pull the frame of one lens side apart slightly. Push the lens out from the back through the front of the sunglasses. Place the lens on a soft surface where it won't be scratched. Repeat for the other side of the sunglasses.
- 5). Place one of the replacement lenses on the correct side of the sunglasses and align it with the lens groove on the sunglasses. Slide the outer tab of the lens into the frame from the front of the sunglasses. The lens will snap into place. Replace the other lens in the same way.
- 6). Replace the rubber washers and screws in both sides of the sunglasses under the orbital.
Source...