- 1). Mix together powdered tiling grout and room temperature tap water in the ratio described on the packaging.
- 2). Wait for the grout and water mixture to adhere for 10 minutes before continuing.
- 3). Moisten a rubber float, then scoop out the grout and spread it over the 12-inch tiles and into the open joints with the float. Move the grout with large sweeping motions of the float diagonally and evenly spread the grout into the joints.
- 4). Wait approximately 10 to 15 minutes for the grout to dry. Moisten a cloth and run it over the tile to remove the dried film that appears.
- 5). Wait for the grout to completely cure for three hours. Use a clean cloth to buff the tiles. Wait 24 hours before using the floor.
Source...