The Liquid Adhesive Method:
Apply liquid adhesive to your scalp, in front of your natural hairline, using either your finger, which may provide the best control and coverage for some wearer, or a flat cosmetic stick.
Do not use Q-tips as the fibers will bond to the adhesive.
Follow the manufacturer\'s instructions regarding cure times.
Optional: Put a wig cap on to better protect your own hair.
Begin by lightly applying the liquid adhesive, around the perimeter of your hairline.
When applying the liquid adhesive to the nape area, drop your chin to your chest, so that when wearing your full lace wig, when you look down, it won\'t lift or tug your skin.
Allow the liquid adhesive to dry completely, until it is clear in appearance and tacky to the touch.
Then pull the hair of the full lace wig into a firm knot at the crown while the hair unit is on a wig head.
Sprits with water to tame flyways.
Place the lace edge of the full lace wig, on the skin of your forehead,along your natural hairline, press firmly and use a fine teeth comb to push back the baby hair .
Continue to adjust the lace of the full lace wig around the whole perimeter of your hairline working from the forehead to the sides of your head down to the nape area.
Note:When applying the lace of the full lace wig to the nape area, drop your chin to your chest, when you reach the nape area,then press the lace firmly .
Avoid touching the forehead hairline area once the adhesive has set and the lace has been applied.
Secure with a snug headband or wrap to completely set the bonding process.
Avoid heavy perspiration ,as well as water on the full lace wig for 24-48hrs.
The Tape Method:
Cut the full lace wig, pre-bond double sided tape to fit your hairline.
Most tapes are precut for convenience.
Optional: Put a wig cap on to better protect your own hair.
Place the pre-bond double sided tape strips in front of your natural hairline around the whole perimeter of your head.
Then apply the lace of the full lace wig, with a little pressure onto the strips starting from the front of your forehead and working your way to one side of your head, then the other side of your head. Again, remember when you reach the nape area, drop your chin to your chest, so that when wearing your full lace, if/when you look down, it won\'t lift or tug your skin.
Wrap the circumference of your head with a scarf or snug headband to completely set the bonding process. Avoid heavy perspiration as well as water on the full lace wig for 24-48hrs.
The Combination of Both above mentionned Methods:
Apply liquid adhesive to your scalp in front of your natural hairline using either your finger, which may provide the best control and coverage for some wearer, or a flat cosmetic stick.
Allow the liquid adhesive to dry completely until it is clear in appearance and tacky to the touch.
Cut the full lace wig, pre-bond double sided tape to fit your hairline.
Optional: Put a wig cap on to better protect your own hair.
Place the pre-bond double sided tape strips in front of your natural hairline around the whole perimeter of your head.
Then apply the lace of the full lace wig, with a little pressure onto the strips starting from the front of your forehead and working your way to one side of your head, then the other side of your head. Again, remember when you reach the nape area, drop your chin to your chest, so that when wearing your full lace, if/when you look down, it won\'t lift or tug your skin.
Wrap the circumference of your head with a scarf or snug headband to completely set the bonding process. Avoid heavy perspiration as well as water on the full lace wig for 24-48hrs.
For more infos,please go to: http://www.fulllacewigsbyhottipsfashion.com
Apply liquid adhesive to your scalp, in front of your natural hairline, using either your finger, which may provide the best control and coverage for some wearer, or a flat cosmetic stick.
Do not use Q-tips as the fibers will bond to the adhesive.
Follow the manufacturer\'s instructions regarding cure times.
Optional: Put a wig cap on to better protect your own hair.
Begin by lightly applying the liquid adhesive, around the perimeter of your hairline.
When applying the liquid adhesive to the nape area, drop your chin to your chest, so that when wearing your full lace wig, when you look down, it won\'t lift or tug your skin.
Allow the liquid adhesive to dry completely, until it is clear in appearance and tacky to the touch.
Then pull the hair of the full lace wig into a firm knot at the crown while the hair unit is on a wig head.
Sprits with water to tame flyways.
Place the lace edge of the full lace wig, on the skin of your forehead,along your natural hairline, press firmly and use a fine teeth comb to push back the baby hair .
Continue to adjust the lace of the full lace wig around the whole perimeter of your hairline working from the forehead to the sides of your head down to the nape area.
Note:When applying the lace of the full lace wig to the nape area, drop your chin to your chest, when you reach the nape area,then press the lace firmly .
Avoid touching the forehead hairline area once the adhesive has set and the lace has been applied.
Secure with a snug headband or wrap to completely set the bonding process.
Avoid heavy perspiration ,as well as water on the full lace wig for 24-48hrs.
The Tape Method:
Cut the full lace wig, pre-bond double sided tape to fit your hairline.
Most tapes are precut for convenience.
Optional: Put a wig cap on to better protect your own hair.
Place the pre-bond double sided tape strips in front of your natural hairline around the whole perimeter of your head.
Then apply the lace of the full lace wig, with a little pressure onto the strips starting from the front of your forehead and working your way to one side of your head, then the other side of your head. Again, remember when you reach the nape area, drop your chin to your chest, so that when wearing your full lace, if/when you look down, it won\'t lift or tug your skin.
Wrap the circumference of your head with a scarf or snug headband to completely set the bonding process. Avoid heavy perspiration as well as water on the full lace wig for 24-48hrs.
The Combination of Both above mentionned Methods:
Apply liquid adhesive to your scalp in front of your natural hairline using either your finger, which may provide the best control and coverage for some wearer, or a flat cosmetic stick.
Allow the liquid adhesive to dry completely until it is clear in appearance and tacky to the touch.
Cut the full lace wig, pre-bond double sided tape to fit your hairline.
Optional: Put a wig cap on to better protect your own hair.
Place the pre-bond double sided tape strips in front of your natural hairline around the whole perimeter of your head.
Then apply the lace of the full lace wig, with a little pressure onto the strips starting from the front of your forehead and working your way to one side of your head, then the other side of your head. Again, remember when you reach the nape area, drop your chin to your chest, so that when wearing your full lace, if/when you look down, it won\'t lift or tug your skin.
Wrap the circumference of your head with a scarf or snug headband to completely set the bonding process. Avoid heavy perspiration as well as water on the full lace wig for 24-48hrs.
For more infos,please go to: http://www.fulllacewigsbyhottipsfashion.com
Source...