How to Change the Light in the Center Overhead Console of a Dodge Pickup
- 1). Locate the two reading lamp lenses in the overhead console of your truck. Insert a long, thin-bladed tool into the outer edge of the lens between the console and the lens. A thin, flat screwdriver works well here.
- 2). Pry out on the handle of the tool, pushing the tab on the inside of the lens in slightly, while pulling it down. Be careful that you do not apply so much pressure that you break the tab or the console.
- 3). Locate the bulb under the lens and pull it out of the bulb socket. Discard the old bulb and install a new 168 bulb in its place, making sure the bulb seats firmly in the socket.
- 4). Raise the lens into position against the overhead console, pushing it up until it snaps in place. You may need to apply light pressure against the tab on the lens to slide it in place.
Source...