- 1). Ensure that you are using the correct kind and size nails for your Simpson's connectors. They are as follows:
3D common connectors use 3¹⁄2-inch wire nails.
N16 connectors require 3, 2 1/2-inch wire nails.
10D common connectors use 3-inch wire nails.
N10 connectors use 2 joist nails.
8D common connectors use 2 1/2-inch wire nails.
N8 use 1 1/2-inch nails. - 2). Drive nails 1 1/8 inch to 1 5/8 inch into the wood for best results.
- 3). Use a nail gun carefully to ensure that the nails are correctly installed. Nail guns must be used with a hole locating tool.
Source...