- 1). Press "Menu" or "Setup" on the television remote to access the menu page. Scroll through the menu options using the directional buttons and press "Enter" or "Select" to enter the "Video" menu. Scroll to the "Convergence" option and open it using the necessary action key.
- 2). Observe the center cross hair on the screen to verify which CRT tube is misaligned. When the tubes are correctly aligned, the cross will be completely white. If it is a different color, then you need to correct that color. Press "Video" to switch between the colors, then press "Adjust" to converge the lines.
- 3). Press the directional buttons to align the tubes until the cross is completely white. Switch back and forth between the red and blue tubes using the "Video" button until it is correctly aligned. The green tube can't be adjusted and is used as a constant to align the other tubes.
- 4). Press "Audio" or any other indicated action key to access the "Multiple Point Convergence" screen. The Multiple Point Convergence screen has 64 individual points that you can align to give a better quality focus on the screen. Use the directional button to scroll to different out-of-focus or colored cross points.
- 5). Press "Enter" to select the points that you need to adjust. Rotate between the directional keys to adjust the point until it is completely white. Press "Enter" to release the cross point and move to another until the entire cross point area is white. Press "Menu" or "Exit" to save the adjustments and exit the convergence screen.
Source...