How to Remove the Back Plastic Glass That Zips In on a 1999 BMW 323I
- 1). Lower the windows in your BMW and open the convertible top. Raise the top an inch or two from the windshield frame to stretch it out, making it easier to work on the rear window.
- 2). Separate the black rubber weather seal from the rear window using the flat plastic tool provided with the replacement window. A new seal is also included with the replacement window so don't worry if you damage the existing one during removal.
- 3). Pry the metal clip off the bottom of the window with a flat-head screwdriver. Pull the clip off the base of the window. Unzip the old window and remove it from the top. Clean any residual glue or dirt from the top with rubbing alcohol on a cloth.
- 4). Align the new window and attach the zipper. Zip the window into place. Replace the metal clip where the zipper stops to prevent it from accidentally unzipping. Press the clip into place. Apply a small piece of the double-sided tape included with the window to the top of the clip. Remove the protective sheet from the double-sided tape attached to the new window.
- 5). Press the new, rubber weather seal included with the replacement window into place on the double-sided tape. Press firmly all the way around the window to attach the seal and protect your rear window from leaks. Raise the convertible top to the "Up" position and let it sit for 24 hours before you put the top down.
Source...