Arm the System

• 1). Turn off your motorcycle's ignition.
  
  
• 2). Press the M357T remote control within 50 seconds of turning off the ignition.
  
  
• 3). Wait for your motorcycle direction indicators to flash twice. Two audible tones will be heard as this happens.
  
  
• 4). Wait for the LED display to flash for 26 seconds. The lights will flash at an increasingly faster rate. Do not touch anything at this point to fully arm the alarm system.
  
  

Test the System

• 1). Complete the process of arming the alarm system up until the LED display flashes.
  
  
• 2). Press the remote control while the LED display flashes to begin testing the alarm. You will hear an audible beep when you press the remote control to indicate you have entered the testing cycle. The system will test each alarm input and emit an audible beep as it tests each input.
  
  
• 3). Wait until the testing cycle is completed. Once completed, the alarm will return to the arming stage and the LED display will flash at an increasingly faster rate. After 26 seconds, the alarm is armed.
  
  

Disarm the System Using the Remote Control

• 1). Stand next to the motorcycle.
  
  
• 2). Press the remote control. Your motorcycle's direction indicators will flash and an audible tone will be heard, indicating the immobilization system of the alarm has been deactivated.
  
  
• 3). Turn on your motorcycle's ignition within 50 seconds of deactivating the alarm. If you do not start the motorcycle within 50 seconds of deactivating the alarm, the alarm will reset and immobilize the motorcycle.
  
  

Disarm the System using the PIN Number

• 1). Turn on your motorcycle's ignition. The LED display will be on.
  
  
• 2). Turn off your motorcycle's ignition within 10 seconds. The LED display will slowly flash.
  
  
• 3). Turn on your motorcycle's ignition as soon as the LED flashes the number of times that corresponds to the first digit of your PIN number. For example, if your PIN number is 45678, turn on your motorcycle's ignition once the LED has flashed four times.
  
  
• 4). Turn off your motorcycle's ignition within 10 seconds. The LED will begin a new flashing sequence.
  
  
• 5). Turn on your motorcycle's ignition once the LED flashes the number of times that corresponds to the second digit of your PIN number. For example, if your PIN number is 45678, turn on your motorcycle's ignition once the LED has flashed five times.
  
  
• 6). Turn off your motorcycle's ignition within 10 seconds. The LED will begin a new flashing sequence.
  
  
• 7). Repeat this process until all five PIN number digits have been entered. If you enter the PIN number correctly, the alarm system will deactivate the immobilization feature and you can drive your motorcycle. If you enter the PIN incorrectly, the LED will flash and you will need to enter the PIN number again. If you incorrectly enter the PIN number three times, the alarm system will lock and prevent you from attempting again for 30 minutes.