- 1). Place a rag or a towel onto the blade of the small flat-head screwdriver to avoid scratching the Saab.
- 2). Push and maneuver the small flat-head screwdriver gently under the Saab emblem. Place any excess rag between the hood and the screwdriver to avoid scratches to the paint. This is necessary to loosen the foam tape that keeps the emblem attached to the Saab.
- 3). Pry and slide the small flat-head screwdriver over the entire emblem, continuously in a slow and gentle motion.
- 4). Pull at the emblem with your hands to remove it from the Saab.
- 5). Remove the excess foam tape from the hood, gently with a razor blade. Apply some WD-40 on it.
- 6). Wipe down the area of the emblem with a paper towel and apply some rubbing alcohol on it.
Source...