How to Replace a Window on a 2001 Chevrolet Extended Cab Pickup
- 1). Turn off the engine and open the door.
- 2). Remove the eight poppets along the edge of the door trim panel with a socket wrench and remove it from the vehicle. Make sure to disconnect the electrical connectors between the door and the panel before removing it.
- 3). Peel off the plastic water shield.
- 4). Remove the inner mounting bezel with a slotted screwdriver to pry out the three retaining clips. Remove the two inner panel bolts with a socket wrench. Disconnect the electrical connector and remove it from the door.
- 5). Slide the inner mounting bezel rearward to release the regulator roller from the window sash and remove the panel. Loosen the window front channel top screw and remove it.
- 6). Slide the window out of the glass channels from the bottom of the door. Install a replacement window by sliding it up through the door. Reassemble the door by reversing the disassembly procedure.
Source...