- 1). Measure 10 inches from either end of the front bumper and drill two mounting holes. Mount the fog lights onto the underside of the bumper with the included hardware.
- 2). Run the wiring harness for the fog light behind the bumper body. Connect the ground wire from the fog lights to the side of the vehicle's firewall. Stretch the power wire up to the headlights' wiring harness and use the razor blade to shave a bare spot in the wiring.
- 3). Wrap the end of the power wire from the fog lights around the headlight wire and then cover the wires with electrical tape. Test and make sure that the lights operate with the headlight switch.
Source...