Plastic Headliner Boards

• 1). Scrub the headliner board with a scrubbing brush or sandpaper to remove any foam residue.
  
  
• 2). Saturate a soft terry cloth with water and dish soap.
  
  
• 3). Place the cloth over any glue spots on the headliner.
  
  
• 4). Cover the headliner board with a plastic sheet or trash bag.
  
  
• 5). Leave the moist cloths on the headliner for four hours, allowing the glue to moisten.
  
  
• 6). Remove the plastic covering and moist cloth.
  
  
• 7). Wet another terry cloth with soap and water.
  
  
• 8). Dab the softened glue with the cloth. Rub gently to remove the glue.
  
  
• 9). Use a cotton ball moistened with rubbing alcohol on stubborn glue.
  
  
• 10
  
  Wipe the headliner board clean with a wet, soap-free terry cloth.
  
  
• 11
  
  Allow the headliner board to dry completely. Install the board after it is dry.
  
  

Fiberglass Headliner Boards

• 1). Scrub the headliner board with a scrubbing brush or sandpaper to remove any foam residue.
  
  
• 2). Moisten the glue using the wet terry cloth and plastic sheet process.
  
  
• 3). Saturate a cotton ball with acetone.
  
  
• 4). Rub moist glue with the acetone to remove it from the fiberglass headliner board. Use a toothbrush saturated with a acetone for tough spots.
  
  
• 5). Wipe the headliner board clean with a wet, soap-free terry cloth.
  
  
• 6). Allow the headliner board to dry completely before installing it.